What areas does Tech Energy America serve?

We serve all of Arizona — primary metro coverage in Scottsdale, Phoenix, Mesa, Tempe, Chandler, Gilbert, Glendale, Peoria, and Tucson — and statewide on request. Wholesale shipping is nationwide via freight.

Do you supply Square D equipment?

Yes. Tech Energy America supplies genuine Square D / Schneider Electric product, sourced through authorized channels: QO and Homeline load centers, breakers, safety switches, NEMA enclosures, and dry-type transformers. We also distribute JST Power, Priority Wire, Southwire, CME Wire, Allied Tube, and Cantex.

Do you sell wholesale to electrical contractors?

Yes. We provide wholesale pricing on wire, conduit, switchgear, breakers, panelboards, transformers, and fittings to licensed electrical contractors, solar EPCs, and resellers. Open an account by emailing contact@techenergyamerica.com or calling (480) 520-1966.

What is the lead time for UL switchgear?

We manufacture UL-listed switchgear in-house in Scottsdale, AZ. Standard 480V/600V assemblies typically ship in 4-8 weeks — significantly faster than out-of-state OEMs that quote 16-26 weeks.

Do you supply EV charging equipment and materials?

Yes. We supply Level 2 240V EV charging equipment plus the conductors, breakers, and load centers for the job — for residential and commercial projects. Tech Energy America supplies the equipment and materials only; installation is done by your licensed electrical contractor or by our sister company, ConstruTech Group (construtechgroup.com).

Do you provide bilingual English Spanish service?

Yes. Our entire team operates bilingually in EN/ES, including account management, sales, RFQs, and order logistics. We also coordinate cross-border with our Tecnergy Mexico operations in Hermosillo.

How fast can I get a project quote?

RFQ-to-quote turnaround is 24-48 business hours for most BOMs. Same-day for stock items at our Scottsdale warehouse.

Does my commercial electrical project need a permit in Phoenix?

Almost always yes. Any work beyond a like-for-like fixture swap requires a permit in Phoenix metro jurisdictions. Operating without a permit surfaces at sale, refinance, or insurance renewal. A licensed contractor obtains the permit as part of standard scope.

Commercial Electrical · 10 min read · Published 2026-05-15

How Much Does a Commercial Electrician Cost in Phoenix? (2026 Pricing Guide)

Name: UL Certified Custom Switchgear Assemblies
Brand: Tech Energy America
Availability: InStock
Rating: 5.0 (16 reviews)

Honest pricing ranges for commercial electrical work in the Phoenix metro — by project type, what drives the price up or down, red flags in low-ball quotes, and what to expect inside a complete contractor proposal.

TL;DR: Commercial electrical work in Phoenix metro ranges from about $85–$165/hour for troubleshooting visits, $4.50–$9.50/sq ft for tenant improvement (TI) electrical, and $28,000–$150,000+ for full panelboard or switchgear upgrades. The price depends mostly on scope, permitting jurisdiction, lead times on long-lead components, and whether the contractor is going to manage the city permit process for you.

What drives commercial electrical cost in the Phoenix metro

Three numbers determine the bottom line on every commercial electrical project in Arizona: labor hours, material cost, and overhead/permit costs. Within those, here are the variables that move the price the most:

Project scope. A 200A panel upgrade is a different conversation than a 1,200A service-entrance switchboard. Same building, same address — but the second one is 5–8 times the labor and 4–10 times the material.
Permitting jurisdiction. City of Phoenix, Scottsdale, Mesa, Tempe, Chandler, Gilbert, Glendale, Peoria, and Tucson each have different permit fees, inspection cycles, and submittal requirements. Scottsdale and Tempe tend to be the cheapest and fastest; City of Phoenix on larger commercial projects can add 3–6 weeks for plan review alone.
Long-lead components. Switchgear, transformers, and large panelboards have 8–22 week factory lead times in 2026. A contractor who doesn't pre-order at PO acceptance will slip your schedule and quietly mark up "expedited" pricing later.
Emergency vs scheduled. Same job, 2x–3x cost if it's after-hours, weekend, or true emergency response. Scheduling the work in advance avoids premium rates.
Code compliance updates. NEC 2020/2023 require updated SCCR ratings, surge protective devices, and arc-flash labeling. Adding code compliance during a remodel is cheaper than retrofitting later, but it does increase the quote.

Typical Phoenix-metro commercial pricing (2026)

These are indicative budget ranges for the Phoenix metro, not Tech Energy America pricing — Tech Energy America supplies the materials and does not perform installation. Your project may fall outside them if scope or jurisdiction is unusual — get an itemized number from a licensed contractor after a site walk.

Project type	Typical price range	What's included
Troubleshooting visit	$85–$165 / hr + materials	Diagnosis, basic repair, no major scope
200A commercial panel upgrade (like-for-like)	$4,500–$7,500	Panel, breakers, labor, permit, inspection
400A panelboard replacement (Square D / Eaton)	$11,000–$18,500	Panel, feeder upgrades, permits, weekend outage scheduling
Tenant improvement electrical (office TI)	$4.50–$9.50 / sq ft	Lighting, outlets, dedicated circuits, low-voltage rough-in
Restaurant kitchen wiring (full electrical)	$45,000–$110,000	Hoods, walk-in cooler, fryers, signage, interior + exterior lighting
Solar PV install (rooftop commercial)	$1.85–$2.95 / W	Panels, inverters, racking, interconnection, monitoring
800–1,200A switchgear install	$65,000–$150,000+	Switchgear, transformer, feeders, utility coordination, arc-flash study
EV charger install (Level 2, commercial)	$2,800–$6,500 per port	Charger, conduit, panel breaker, permit

Red flags when comparing commercial electrical quotes

Cheap quotes are usually cheap for a reason. Watch for these patterns:

No itemized line items. A "lump sum" quote with no breakdown of labor hours, materials, permits, and contingency is hiding either thin margins (the contractor will be incentivized to skip steps) or unclear scope (you'll get change orders later).
"Permits not included." If permits aren't in the quote, you're going to pull them, which means the contractor isn't licensed for the work — or doesn't want to take responsibility for what gets inspected.
No mention of long-lead items. If a quote includes switchgear, panelboards over 600A, or transformers without mentioning factory lead times, the contractor is hoping you won't ask. Get the lead time in writing.
No warranty terms. Standard for licensed Arizona commercial electrical work is at least 1 year on labor and full manufacturer warranty pass-through on materials. Anything less is a red flag.
No Arizona contractor license on the quote. Verify the license is current and the classification covers your work scope at the Arizona contractor lookup before signing anything.

What's included in a Tech Energy America material quote

Tech Energy America supplies the materials and equipment for commercial projects in the Phoenix metro. When you request a material quote, it includes:

Line-by-line pricing. Send your drawings or material list and we price it line by line.
Itemized line items. Materials by line with manufacturer + part number and quantity, clearly broken out. Hand the quote to a third party and you should get the same number back.
Confirmed lead times. We confirm material availability with our vendors (Square D, JST Power, CME Wire, Priority Wire, Southwire) before quoting, so the timeline is real.
Supply only. Tech Energy America does not obtain permits or perform installation — permitting, inspections, and installation stay with your licensed electrical contractor.
Bilingual support. Quotes and order support in Spanish and English.
Warranty documentation. Manufacturer warranty documentation on the equipment we supply.

Common questions

How long does a typical commercial electrical install take in Phoenix?

For a straightforward 200A–400A panel upgrade, 2–4 weeks total including permit, material delivery, and a Saturday installation window. For larger scopes like 800A+ switchgear, 8–12 weeks is typical, with the bulk being factory lead time on equipment. Tenant improvement electrical depends on the buildout — a 5,000 sq ft office TI usually completes in 3–5 weeks.

Are commercial electricians more expensive in Arizona than in California or Texas?

Per-hour labor rates in the Phoenix metro tend to land lower than the Los Angeles and Bay Area markets, and roughly on par with Dallas–Fort Worth and Austin. Material costs are similar nationwide for major brands. Where Phoenix can run higher: NEMA-3R outdoor enclosures rated for the heat add a small premium, and high-voltage transformer lead times have crept up across the Southwest due to utility demand.

Does my commercial electrical project need a permit?

Almost always — yes. In Phoenix metro AHJs, any work that adds, modifies, or replaces electrical equipment beyond a like-for-like fixture swap requires a permit. Operating without one is a code violation that surfaces at sale, refinance, or insurance renewal. The permit fee is usually a tiny fraction of the project cost, and a licensed contractor obtains it as part of standard scope.

Can I see itemized pricing before signing?

Yes — and you should. A legitimate commercial contractor in Arizona will give you a fully itemized quote with labor, materials, permits, and contingency broken out. If you can't see the line items, you can't compare apples to apples between bidders.

Are Tech Energy America material quotes free?

Yes. Free itemized quote on the materials and equipment for any commercial project in the Phoenix metro. Tech Energy America supplies materials only and does not perform installation.

What if my project is in Tucson or a smaller AZ city?

We supply materials statewide in Arizona — Tucson, Flagstaff, Yuma, Casa Grande, Sierra Vista. Freight may add a line item depending on distance and order size.